If the sensor’s alarm or error status remains active and uncorrected, and there are phone numbers in the notification tree, the system will continue to call out for the duration of the alarm. The proper response is to determine what’s causing the alarm or error and attempt to correct it. Entering the correct code on the phone call will pause calls, and adding an acknowledgment within CIMScan will also pause notifications to give time to do this. If it is determined that the alarm or error cannot be resolved and notifications need to cease temporarily, within CIMScan an administrative user can check the box to the left of the monitoring point(s) in the Current Measurement Values table on the Home screen and choose Sensor Disable from the Select an Action drop-down to disable Alarm Processing for a set period of time.